|
阅读：15836回复：37
有美容方面问题就问我张某人，有问必答3-5抛光原理 祛除划痕意味着什么？
What it means to remove a scratch out of anything...
在任何物体表面祛除划痕意味着什么？ How do you remove a scratch out of; 你该如何祛除以下物体表面的刮痕？ * Glass 玻璃 * Clear plastic like a headlight lens, radio face plate, dash gages? 透明塑料，比如车大灯。收音机面板，仪表台！ * Chrome, like a chrome wheel? 铬，比如镀铬钢圈 * Paint? 漆面 * Interior plastics like a plastic door sill or glove box door? 塑料内装饰，门槛 扶手箱的塑料板 * Stainless steel, like a stainless steel door sill protector? 不锈钢，比如不锈钢防护踏板 * Aluminum? 铝 * Rubber? 橡胶 * Pebble textured plastic like trim components? 有花纹纹理的塑料胶条，比如装饰部件 |
|
最新喜欢： ET蚊子
|
|
1楼#
发布于：2010-09-07 23:46
This article isn't' about the how-to for removing scratches out of the above materials or coatings but about the practical science behind how you remove a scratch or any below surface defect out of any material or surface coating. Read the below statement and think about it for a few minutes...
这篇文章并不是告诉你如何的快速的把物体表面的划痕快速的祛除，而是告诉你关于在任何的材质或者表面涂层上祛除划痕的理论和物体表面缺损的基本而实际的理论！ 请阅读下面的说明并思考几分钟！ "Some materials and/or surface coatings don't lend themselves well to being abraded with the end-result looking good or looking like the original appearance" 你需要明白，一部分材质的表面或者表面涂层并不适合被拿来研磨已达到看起来良好的结果或者恢复它原来的外观！（这样的情况是不可能发生的,比如塑料件的表面，仪表盘的塑料表面） In order to remove a scratch out of anything, metal, plastic glass, paint, etc. You must remove material around the scratch until the upper most portions of the surface are level with or equal to the lowest depths of the scratch or defect you're trying to remove. 为了达到将划痕从金属 塑料 玻璃 漆面等材质上祛除的目的，你必须抛掉划痕周边的材质，直到物体表面的最高部分和你试图祛除划痕的最低的部位是水平的，这样看起来就是平整的表面了！（划痕消失了） Does that make sense? 这样做你认为是合理的吗？ |
|
|
|
2楼#
发布于：2010-09-07 23:49
The below diagram is for paint, however the the same idea applies to just about any coating or surface material.
下面是张漆面解剖图，其他任何的涂层和材质表面所使用的概念是相同的！ |
|
|
|
3楼#
发布于：2010-09-07 23:57
In essence, you don't really remove a scratch, you remove material around a scratch.
你应该知道，基本上，你不是真的把刮痕祛除而是你把痕迹周边的材质抛掉了！ Then the big question becomes... s the material or coating workable? 这个问题就成为。。。 这个材质是真的百分百可以祛除的吗？（能达到你想要的目的？） As in, can you abrade small particles of the material or surface coating and leave behind an original looking surface. 也就是你可以研磨划痕周边涂层的一小部分并且让他们回复原来的表面外观吗？ For example: Some things you can abrade, (remove the scratch), but you can never completely remove all of your abrading marks, thus you can't really fix the problem, all you can do is exchange one set of scratches of a different set of scratches. 举个例子，有些材质你可以研磨它，但你没办法完全把划痕去掉，因为你在研磨的过程中会产生新的划痕,因此你没有办法真的能解决这个问题，你能做的就是把旧的划痕去掉，在表面留下新的划痕！ |
|
|
|
4楼#
发布于：2010-09-08 00:04
The next factor you have to consider or at least understand is;
下一个是你应该思考和了解的一个因素 How thick is the surface material or material you're working on? 你所研磨的物质的表面到底有多厚？？ You are limited to what you can do with any material or surface coating. By this we mean there is usually a limit as to how much material you can remove before you run into the risk of removing too much and exposing the underlying surface or removing so much material that you change the component you're working on in a way that it won't look good and you can't undo the damage. 你在任何的物质表面研磨的次数是有限的，我要告诉你的是你面临过度研磨导致物体基低表面暴露出来或者过度研磨导致你研磨的物质的表面看起来非常糟糕，并且你没办法来弥补你造成的损伤，这个些问题没有出现之前，你必须知道，你抛光的物体表面的厚度是有限的！ |
|
|
|
5楼#
发布于：2010-09-08 00:17
There's a saying on this forum we use often when discussing different members detailing projects and it goes like this,
当我们在讨论不同人在实际工作中遇到的问题的时候，有一句话我们大家都应该记住，它就是 "Sometimes you don't know what you can so until you try" 直到你尝试的做了，你才能知道！ It's always a good idea to test your choice of products, applicator materials and application process, (by hand or by machine), to an inconspicuous area. If you cannot make a small area look good with your product, applicator and process, you will not be able to make the entire surface look good. 在一个不起眼的区域测试你的新产品，你的新工具，你的操作流程是一个好的习惯，如果你没有尝试性得来做一块来了解它们得话，那么你就会没有办法把整个车做出来看看上去是完美的！ It's always a good idea to test first and error on the side of caution, versus make a mistake you cannot undo over the entire component or vehicle. 当你有新的，不了解的产品和工具时，永远记得在一个小区域先进行测试，加深你对它们的了解，也许你会犯错误，但这只是一个警告，你可以马上改正加以弥补，如果你没有这么做，那么很可能你会无法解决你给整个车辆（全车）带来的错误！ |
|
|
|
6楼#
发布于：2010-09-08 23:34
英文不错
|
|
|
|
7楼#
发布于：2010-09-09 16:50
回 楼主(zhangxiyao2000) 的帖子
DDWS |
|
|
8楼#
发布于：2010-09-12 18:56
这么好的东西，大家光看不顶！真可惜了！晕死！
|
|
|
上一页
下一页